Jumat, 23 April 2010
Jumat, 09 April 2010
Paper Petal Cones for the Reception Table
Materials and Tools:
Self-healing selection mat
Stylus
Scissors
¼\" wide satin ribbon
Ruler
1/8\" diam azygos hole punch
Anna Griffin decorative essay (12\" x 12\")
Double-sided agglutinate tape
Sticker paper
Craft knife
Clear foam stamp
Gold stamping ink
Laser printer
Petal fillings – chromatic petals, lavender, candy-covered almonds
1. Print petal strobile template onto grapheme lateral of decorate 12\" x 12\" paper; alternately, 8-1/2\" x 11\" essay can be used.
2. Cut along solidified lines of template using a foxiness knife or scissors. Next, use tool to score the speckled lines. Use a ruler as a guide.
3. Use 1/8\" azygos hole punch to punch two holes as indicated on pattern. Thread slip through holes and knot both ends on the stark lateral of paper.
4. Apply double-sided agglutinate tape on speckled lines, then crimp the 90-degree corner of the essay towards the speckled line. Do not crimp folded bounds of paper.
5. Roll the essay twice until the roll meets the plumb speckled line.
6. Fold remaining flap of essay around the strobile and advise gently to seal the adhesive.
7. Print the metallic circle template onto sticker paper. Ink personalized monogrammed foam stamp with metallic stamping ink and advise into the edifice of the circles.
8. Peel stamped sticker from essay and adhere to the cone. Fill strobile with your pick of chromatic petals, chromatic or candy-covered almonds. Fold the top surface over to seal.
9. Hang the cones on the backwards of each guest's chair.
Bridal-Chair Swag
DIY Network ceremony proficient Beverly adventurer shows how to create a unique bridal accessory, a bridal-chair swag.
Materials and Tools:
4' silk vine strand
One winder paddle wire
Wright'sB. or OffrayB. ribbon, 2 to 2 1/2\" wide
Assorted silk flowers with stems, in a variety of colors
One bunch preserved white baby's breath
Glue gun with cement sticks
Wire-cutters
1. Take the vine strand and crimp it in half, raise it for thickness.
Measure digit 48\" lengths of ribbon. Fold each in half. Attach to the ends of the swag with wire.
2. Make digit four-loop bows with digit loops to the right and digit to the left. Finish the bow with an extra loop in the center, and bond a piece of patterned accommodate finished all the loops, leaving sufficiency accommodate to bond it to the vine strand. Leave 15\" tails.
3. Carefully accommodate the bows onto each modify of the vine swag.
4. Trim stems of assorted silk flowers close to the flower, then hot-glue flowers throughout the vine swag.
Hot-glue sprigs of preserved fresh baby's breath around the swag to fill in extra spaces.
5. Tie each modify of the swag to the back of the chair, using the 48\" slip lengths on each modify to bond a bow to the chair.
Tips:
Use stark vine or vine with grapevine clusters.
Use several different colors of ribbon, depending on the colouration plot and the overall design of the swag.
Once you have the vine base, superior various shades of silk flowers, or purchase fresh flowers to accommodate into the swag that day.
For a dressier look, weave a trend naif 7/8\" slip finished the vine strand.
Materials and Tools:
4' silk vine strand
One winder paddle wire
Wright'sB. or OffrayB. ribbon, 2 to 2 1/2\" wide
Assorted silk flowers with stems, in a variety of colors
One bunch preserved white baby's breath
Glue gun with cement sticks
Wire-cutters
1. Take the vine strand and crimp it in half, raise it for thickness.
Measure digit 48\" lengths of ribbon. Fold each in half. Attach to the ends of the swag with wire.
2. Make digit four-loop bows with digit loops to the right and digit to the left. Finish the bow with an extra loop in the center, and bond a piece of patterned accommodate finished all the loops, leaving sufficiency accommodate to bond it to the vine strand. Leave 15\" tails.
3. Carefully accommodate the bows onto each modify of the vine swag.
4. Trim stems of assorted silk flowers close to the flower, then hot-glue flowers throughout the vine swag.
Hot-glue sprigs of preserved fresh baby's breath around the swag to fill in extra spaces.
5. Tie each modify of the swag to the back of the chair, using the 48\" slip lengths on each modify to bond a bow to the chair.
Tips:
Use stark vine or vine with grapevine clusters.
Use several different colors of ribbon, depending on the colouration plot and the overall design of the swag.
Once you have the vine base, superior various shades of silk flowers, or purchase fresh flowers to accommodate into the swag that day.
For a dressier look, weave a trend naif 7/8\" slip finished the vine strand.
Elegantly Decorated Wedding Cake Table
Display the wedding block on a beautifully decorated table using preserved and silk flowers, tulle and bows.
Materials and Tools:
Round table
White tablecloth
Nylon tulle in albescent and pink
Silk flowers
White lace ribbon
Pink wired ribbon
Purple ribbon
White cloth-covered wire
Quick-TiteB. Liquid and Gel Glue
Straight pins
Fresh chromatic petals
1. Cover the block table with a albescent tablecloth. Drape a example of albescent nylon tulle over the tablecloth, and attach widely spaced individual chromatic petals to the tulle with Quick-Tite Liquid and Gel Glue. The tulle and chromatic petals add texture and color.
2. Cut a length of sound nylon tulle 1 1/2 nowadays the circumference of the tabletop. Wrap albescent cloth-covered accommodate around the tulle most every 12\", gathering the tulle into sections. Pin the tulle fastening to the crowning bounds of the table at apiece gather, letting the fastening pall slightly downbound the side of the table, creating a scalloped bounds around the tabletop.
3. Add bouquets prefabricated from flowers and slip bows with long slip streamers to the table. Make threesome separate bows from threesome different sizes and colors of ribbon, and stack them on crowning of one another. Wire them together at the center. Glue flowers with Quick-Tite Liquid and Gel Glue between the loops of the bows rather than arranging them separately into a bouquet. To create apiece bow, take a length of ribbon, and wrap it right and left until there are threesome loops on apiece side. Wrap cloth-covered accommodate around the center.
Materials and Tools:
Round table
White tablecloth
Nylon tulle in albescent and pink
Silk flowers
White lace ribbon
Pink wired ribbon
Purple ribbon
White cloth-covered wire
Quick-TiteB. Liquid and Gel Glue
Straight pins
Fresh chromatic petals
1. Cover the block table with a albescent tablecloth. Drape a example of albescent nylon tulle over the tablecloth, and attach widely spaced individual chromatic petals to the tulle with Quick-Tite Liquid and Gel Glue. The tulle and chromatic petals add texture and color.
2. Cut a length of sound nylon tulle 1 1/2 nowadays the circumference of the tabletop. Wrap albescent cloth-covered accommodate around the tulle most every 12\", gathering the tulle into sections. Pin the tulle fastening to the crowning bounds of the table at apiece gather, letting the fastening pall slightly downbound the side of the table, creating a scalloped bounds around the tabletop.
3. Add bouquets prefabricated from flowers and slip bows with long slip streamers to the table. Make threesome separate bows from threesome different sizes and colors of ribbon, and stack them on crowning of one another. Wire them together at the center. Glue flowers with Quick-Tite Liquid and Gel Glue between the loops of the bows rather than arranging them separately into a bouquet. To create apiece bow, take a length of ribbon, and wrap it right and left until there are threesome loops on apiece side. Wrap cloth-covered accommodate around the center.
Handmade Wedding Invitation
Learn how to attain bespoken ceremony invitations, elegantly enwrapped in handmade paper and ribbon, with inserts and state cards.
1. Cut discover humble of invitation using ornament or die-cut. (Note: In this demonstration, Sandi Genovese uses a bespoken invitation pattern. See Resources for a supplier of bespoken invitation patterns and dies.)
2. Fold on the crease lines. Add agglutinate to the lateral tabs, crimp up and fasten to the body of the invitation to create the pocket.
3. Print game with primary ceremony aggregation (i.e., directions), then trim all game to the aforementioned width. Vary the heights so that they are mark sizes when they are sitting exclusive the pocket.
4. Print the ceremony announcement, trim and double-mat to a filler that fits exclusive the invitation. Wrap the gauzy paper around the matted invitation, overlapping it in the front.
5. Fasten coordinating slip to the invitation, and fasten the matted and enwrapped invitation to the crowning panel (over the ribbon).
6. Tie the slip ends into a bow, trimming any excess slip after the gesture has been tied.
7. Cut discover state envelopes if using a bespoken expire or ornament (U.S. mail requires envelopes to manoeuvre at least 3.5\" x 5\"). Fold on the crease lines. Place agglutinate on the exclusive edges of the bottom surface and crimp up to rank the envelope.(Note: Sandi also uses a bespoken bag expire acquirable from Ellison, in Resources, below.)
8. Print the state aggregation onto a card that fits into the state envelope. Mat the state card and insert into the envelope.
9. Slide the filled state bag into the bottom incurvature with the crowning bag surface exposed.
10. Cut discover the invitation bag with the ornament provided and crimp on the crease lines. Place the complete invitation exclusive and crimp the four bag flaps so that they meet in the middle. Seal with a gold heart sticker.
11. Be trusty to matter the complete invitation at the post duty for the correct item amount.
1. Cut discover humble of invitation using ornament or die-cut. (Note: In this demonstration, Sandi Genovese uses a bespoken invitation pattern. See Resources for a supplier of bespoken invitation patterns and dies.)
2. Fold on the crease lines. Add agglutinate to the lateral tabs, crimp up and fasten to the body of the invitation to create the pocket.
3. Print game with primary ceremony aggregation (i.e., directions), then trim all game to the aforementioned width. Vary the heights so that they are mark sizes when they are sitting exclusive the pocket.
4. Print the ceremony announcement, trim and double-mat to a filler that fits exclusive the invitation. Wrap the gauzy paper around the matted invitation, overlapping it in the front.
5. Fasten coordinating slip to the invitation, and fasten the matted and enwrapped invitation to the crowning panel (over the ribbon).
6. Tie the slip ends into a bow, trimming any excess slip after the gesture has been tied.
7. Cut discover state envelopes if using a bespoken expire or ornament (U.S. mail requires envelopes to manoeuvre at least 3.5\" x 5\"). Fold on the crease lines. Place agglutinate on the exclusive edges of the bottom surface and crimp up to rank the envelope.(Note: Sandi also uses a bespoken bag expire acquirable from Ellison, in Resources, below.)
8. Print the state aggregation onto a card that fits into the state envelope. Mat the state card and insert into the envelope.
9. Slide the filled state bag into the bottom incurvature with the crowning bag surface exposed.
10. Cut discover the invitation bag with the ornament provided and crimp on the crease lines. Place the complete invitation exclusive and crimp the four bag flaps so that they meet in the middle. Seal with a gold heart sticker.
11. Be trusty to matter the complete invitation at the post duty for the correct item amount.
Langganan:
Komentar (Atom)
